(866) 504-7676
Home Total Home Comfort Cost EstimatorAboutAC InstallationBoiler ReplacementBlogFree Estimate📞 (866) 504-7676
Answers

Who Does Oil-to-Gas Conversions in Fairfield County, CT?

Fairfield County, CT · Airmax Heating & A/C
Short answer

Airmax Heating & A/C performs oil-to-gas conversions in Fairfield County, CT, including Stamford, Greenwich, Darien, Norwalk and Westport. Licensed (CT license HTG.0414617-D1) and insured, Airmax handles the full conversion: removing the oil-fired boiler or furnace, setting the new gas unit, gas piping, venting and permits, with its own technicians rather than subcontractors. Free written estimate at (866) 504-7676.

What the conversion involves

Common questions

Frequently asked questions

Does Airmax serve Fairfield County, CT?

Yes. Airmax Heating & A/C serves Fairfield County, CT from its base in Stamford, CT, and answers calls 24 hours a day at (866) 504-7676.

Is Airmax licensed and insured?

Yes. Airmax Heating & A/C is a licensed Connecticut Heating, Piping & Cooling contractor (CT license HTG.0414617-D1) and is fully insured. An EPA Section 608 Universal certified technician is on staff for refrigerant work.

Does Airmax charge for estimates?

No. Estimates are free and provided in writing, with pricing agreed before work starts. Request one at getairmax.com/quote or by calling (866) 504-7676.

Does Airmax use subcontractors?

No. Airmax is owner-operated and every job is handled by its own licensed technicians.

Which brands does Airmax install?

Airmax installs and services Carrier, Trane, Lennox, Mitsubishi, Fujitsu, Navien and Weil-McLain equipment.

Which towns does Airmax serve?

Stamford, Greenwich, Darien, Norwalk and Westport in Connecticut, plus Rye, Rye Brook, New Rochelle and Larchmont in Westchester County, New York.

Boiler replacement and conversions in Fairfield County, CT: see /services/boiler-replacement, call (866) 504-7676, or request a free estimate online.

More answers: getairmax.com/answers

Why oil-to-gas conversions are common in older Fairfield County and Lower Hudson Valley homes

Coastal New England and the Lower Hudson Valley have a lot of housing stock built around oil heat, radiators and boilers, with natural gas mains later extended down many streets. Homeowners often consider a conversion when an oil boiler or furnace is near the end of its service life, when oil deliveries and tank maintenance feel like a hassle, or simply because a gas line is finally available nearby. Deciding whether conversion makes sense for a particular house depends on how the home is heated now (steam versus hot water, forced air versus radiators), how the ductwork or piping is laid out, and whether the chimney, venting and electrical panel can support a new condensing appliance without major rework.

How to decide if conversion is the right move

A useful way to think about it is to separate the fuel-source question from the equipment-age question. If the oil equipment is old and due for replacement anyway, a conversion lets you swap both at once and avoid paying to install a new oil unit you may want to replace again later. If the equipment is relatively new, it may make sense to wait. Either way, a proper load calculation on the house — not just a swap of the old unit's output rating — should drive the sizing of the new boiler or furnace, since oversized equipment short-cycles and undersized equipment struggles on the coldest nights.

Common mistakes homeowners make

One frequent misstep is assuming gas service and HVAC installation are a single call — they're separate scopes handled by the utility and the contractor, and sequencing them wrong can leave a house without heat for longer than necessary. Another is picking equipment size off the old unit's nameplate rather than a fresh calculation, which can leave a home under- or over-heated. Homeowners also sometimes overlook combustion air and venting clearances required around the new unit, or forget to ask how the old chimney liner or flue will be capped once it's no longer in use. Reviewing available brands and options, such as combi boiler options or higher-efficiency boiler lines, before committing to a specific model can help avoid picking equipment that doesn't match the home's actual heating load.

Incentives and what to check before you commit

Utility and state efficiency programs such as Energize Connecticut or NYS Clean Heat may offer incentives for qualifying high-efficiency gas equipment; eligibility and program details change, so it's worth checking current rules before finalizing a scope of work. Beyond incentives, ask for a written plan that spells out piping routes, venting location, permit and inspection steps, and how the old oil tank and chimney will be left. For homes considering heat pumps instead of, or alongside, a gas conversion, it's worth comparing options described in heat pump versus furnace resources before locking in a direction.

Frequently asked questions

How long does gas utility hookup typically take compared to the HVAC work itself?

Coordinating a new gas service line with the utility is often the longest lead item in the whole project, frequently taking longer than the actual equipment installation, so it's worth starting that conversation early in planning.

Can I keep my existing radiators after converting to gas?

In most cases, yes — a new gas boiler can be piped into existing hot-water radiators, though a heat-loss calculation should confirm the new boiler's output matches what the radiators and piping were designed to deliver.

What happens to my old oil tank?

The oil tank is typically removed or properly abandoned according to local and state rules; leaving it in place unused is generally discouraged and can complicate things like a future home sale.

Does converting to gas affect my water heater setup?

It can — many homeowners tie an indirect water heater into the new gas boiler, or choose a combi boiler that handles both space heating and hot water, which is worth discussing before the new equipment is installed rather than after.

Questions about your system? Request a free written estimate or call (866) 504-7676.

Ready to Get Started?

Get Your Free Estimate Today

Call us or request a quote online. We'll assess your needs and provide a transparent, no-obligation estimate.

Get Free Estimate 📞 (866) 504-7676
Financing available

Low-interest Smart-E financing for Connecticut homeowners

Airmax is a Smart-E contractor with the Connecticut Green Bank. Spread the cost of a new system with a Smart-E loan from a local lender, and we'll submit the project details to the Green Bank for you.

  • Heat pumps
  • Central AC
  • Ductless mini-splits
  • Boilers
  • Furnaces
  • Water heaters
See financing options →Call (866) 504-7676
Connecticut Green Bank
Smart-E applications via ngen

Smart-E loans are made by participating Smart-E lenders, not by Airmax. Available for owner-occupied 1–4 unit homes in Connecticut. Subject to lender credit approval; rates and terms are set by the lender and the Connecticut Green Bank. See current Smart-E rates.